Zeonics Systech Defence & Aerospace Engineers (P) Ltd

 

High Voltage Ignition System

High Voltage  Ignition  Systems are  essentially used in  applications like Gasturbine engine  starting  or burning of Lateral fuel in Gasturbines or application where, a burst of energy is required for certain experimentation the Unit consists of a High Voltage  SMPS  source  which  generates  the  D.C  Voltage  typically  around 6KVDC, 10KVDC and 12KVDC.  These  models generate  energy  in  the level of 10 to 25 Joules and the High Voltage produced by these units charges a Capacitor which is coupled to a suitable peaking Spark Gap and this Spark Gap gives a high Impedence, coupling the Load, so invariably of the load Impedence, the  Spark Gap will  transfer the  energy to the load for a Load Impedence as Low as 1Mega Ohms at 12KVDC. Sufficient energy can be transferred to the Load without much effort from the Unit. These Units are moulded and very suitable for applications where the energy has to be transferred to dirty Loads which are normally submerged into dirty environments like Oil, grit, grease etc.

Type  Working Voltage Energy Capacitance PRR I/p Voltage Packing
ZE/IS/6 6KVDC 36Joules  6mfd  2PPS 24Volt D.C. Moulded
ZE/IS/10 10KVDC 25Joules 0.5mfd  2PPS  24Volt D.C. Moulded   
ZE/IS/12 12KVDC 36Joules 0.5mfd 1PPS 24Volt D.C.  Moulded   

These Units are very Compact as well as reliable.

A Specialised 100 Joules Ignition 
System developed for fusion work.

Kindly contact us for specific requirement

Top